Fusion-Crete, Inc. Fusion-Crete, Inc. Fusion-Crete, Inc. Fusion-Crete, Inc. Fusion-Crete, Inc.
Fusion-Crete Animation Fusion-Crete, Inc. Dedicated to a Better Infrastructure Fusion-Crete, Inc. Dedicated to a Better Infrastructure Fusion-Crete, Inc. Dedicated to a Better Infrastructure Fusion-Crete, Inc. Dedicated to a Better Infrastructure Fusion-Crete, Inc. Dedicated to a Better Infrastructure
Home
Products
Examples
Suppliers
Contact/Request Info
Real-World Experiences with Fusion-CreteŽ
Resurfacing of Badly Deteriorated Residential Driveway
BACK TO PHOTO EXAMPLES MAIN PAGE
(click on thumbnails for enlarged photos)
Sequence5No1.jpg (110885 bytes) The surface of this residential driveway is very badly deteriorated.
Sequence5No2.jpg (118879 bytes) In spite of the surface deterioration, this driveway was found to be almost 6 inches thick and quite stable.
Sequence5No3.jpg (85945 bytes) Redwood bender-boards were placed along both sides of the driveway to contain the two FUSION-CRETEŽ squeegee coats used for resurfacing. The first coat (darker gray adjacent to the sidewalk) was applied in a very wet consistency, using a rapid-setting (one hour), non-shrink cement, to fill the cracks and voids and to level the surface. This fast-setting, high early strength cement also allowed for the application of the textured top coat almost immediately following the completion of the base coat.
Sequence5No4.jpg (83202 bytes) Here you see nicely textured top coat applied. FUSION-CRETEŽ concrete-adhesive/enhancer has made made this driveway look like new at a mere fraction of the cost for removal and replacement. 

  Estimated time required: 6 hours, including removal of the redwood bender boards and finishing of the driveway's side edges

BACK TO PHOTO EXAMPLES MAIN PAGE
Home | Products | Examples | Suppliers | Contact/Request Information
© 2002, Copyright Fusion-Crete, Inc.