Fusion-Crete, Inc. Fusion-Crete, Inc. Fusion-Crete, Inc. Fusion-Crete, Inc. Fusion-Crete, Inc.
Fusion-Crete Animation Fusion-Crete, Inc. Dedicated to a Better Infrastructure Fusion-Crete, Inc. Dedicated to a Better Infrastructure Fusion-Crete, Inc. Dedicated to a Better Infrastructure Fusion-Crete, Inc. Dedicated to a Better Infrastructure Fusion-Crete, Inc. Dedicated to a Better Infrastructure
Home
Products
Examples
Suppliers
Contact/Request Info

Fusion-Crete®, Inc. Produces Three Products:

< Back to Products Main Menu 

Fusion-Crete® I Liquid

FUSION-CRETEŽ I LIQUID, an acrylic/copolymer concrete-adhesive/enhancer, which is packaged in 5-gallon plastic pails (with a mixing ratio chart on the back of each pail). One 5-gallon pail will treat approximately one cubic yard of concrete for repair work (anything 1/8 inch or more in thickness) using a relatively dry mixture. One 5-gallon pail will provide approximately 1,200 to 1,800 square feet of a squeegee-consistency coating mixture that is less than 1/8 inch in thickness. Coatings may be applied in thicknesses of 1/32 to 3/32 of an inch. This product must NOT be exposed to freezing temperatures PRIOR to it's use! If this product is frozen prior to application, it will become useless! FUSION-CRETEŽ ll CRYSTALS is the copolymer product recommended for areas subject to temperatures of freezing and below-freezing since this is a powdered product which may safely be stored at virtually any temperature from extreme cold to extreme hot.

Fusion-Crete® II Crystals

FUSION-CRETEŽ II CRYSTALS, a vinyl/copolymer crystallized (powdered) concrete-adhesive/enhancer, which is packaged in 5-gallon plastic pails (with a mixing ratio chart on the back of each pail), and in 55-gallon plastic drums. One 5-gallon pail will treat approximately 1.25 cubic yards of concrete for repair work (anything 1/8 inch or more in thickness) using a relatively dry mix. One 5-gallon pail will provide approximately 1,500 to 2,200 square feet of a squeegee-consistency coating mixture that is less than 1/8 inch in thickness. Coatings may be applied in thicknesses of 1/32 to 3/32 of an inch. 

 

Fusion-Crete® 5-Minute Concrete

FUSION-CRETEŽ 5-MINUTE CONCRETE, a two-component magnesium/phosphate product comprised of Component "A", Liquid Activator, and Component "B", Dry Cement Compound, each component packaged in 5-gallon plastic pails. This product is sold either in "kit" form (which includes one 5-gallon pail of each component) or either component may be purchased separately. One kit will provide three (3) to four (4) cubic feet of material. Two (2) to three (3) parts of silica sand may be added to COMPONENT "B", DRY CEMENT COMPOUND, prior to adding COMPONENT "A", LIQUID ACTIVATOR.

 
Introduction to the many uses of FUSION-CRETEŽ Fusion-Crete® Products
Overview of Fusion-CreteŽ Products
(Current Page)
Technical Information on Our Products

 

 
Home | Products | Examples | Suppliers | Contact/Request Information
© 2002, Copyright Fusion-Crete, Inc.