Fusion-Crete, Inc. Fusion-Crete, Inc. Fusion-Crete, Inc. Fusion-Crete, Inc. Fusion-Crete, Inc.
Fusion-Crete Animation Fusion-Crete, Inc. Dedicated to a Better Infrastructure Fusion-Crete, Inc. Dedicated to a Better Infrastructure Fusion-Crete, Inc. Dedicated to a Better Infrastructure Fusion-Crete, Inc. Dedicated to a Better Infrastructure Fusion-Crete, Inc. Dedicated to a Better Infrastructure
Home
Products
Examples
Suppliers
Contact/Request Info

FUSION-CRETE® LIQUID
with Portland Cement, Type I/II

LABORATORY TEST DATA AND ADVANTAGES
< Back to Technical Information Main Menu

 

FUSION CRETE® products give you all of these advantages:

1 Flexibility. (Flexural strength: 1,355 PSI, ASTM C348.)
2 Compression strength. (5,450 PSI, ASTM C190.)
3 Tensile strength. (645 PSI, ASTM C109.)
4 Abrasion resistance. (1.7 Percent Weight Loss.)
5 Resistance to extreme temperature variations. (0ºF. to 130ºF.)
6 Resistance to cracking, wearing, vibration, and U.V. rays.
7 Excellent frictional characteristics for non-skid properties. (Coefficient of friction range: 0.4 to 0.9.)
8 Minimal application thickness for fully load-bearing overlays. (1/32± Inch to 1/8± Inch.)
9 Ability to be feathered out to zero with absolute bonding.
10 Environmentally safe. (A single-component, non-toxic, non-hazardous, waterborne product.)
11 Ability to chemically bond to old concrete and other surfaces.
12 Allows for the return of heavy vehicular traffic within twenty-four (24) hours using regular Portland Cement.
13 Compatible with fast-setting cements for peak-traffic applications (vehicular and/or pedestrian).
14 Non-re-emulsifiable product base & high-solids content provide maximum protection for applications exposed to standing water, snow, ice, & excessive moisture.
15 Two- to three-year shelf life when stored in dry place at moderate temperatures.
16 Allowances for successive applications, addition of color and/or various aggregates, and for future maintenance.
17 Easy to use with conventional hand tools for the permanent repair & maintenance of concrete, asphalt, masonry, tile, metals, wood, fiberglass, styrofoam, and other surfaces.

Note: This product must NOT be exposed to freezing temperatures PRIOR to it's use! If this product is frozen prior to application, it will become useless!  FUSION-CRETE® ll CRYSTALS is the copolymer product recommended for areas subject to temperatures of freezing and below-freezing since this is a powdered product which may safely be stored at virtually any temperature from extreme cold to extreme hot.
< Back to Technical Information Main Menu
Home | Products | Examples | Suppliers | Contact/Request Information
© 2002, Copyright Fusion-Crete, Inc.